Back pain sucks. It affects your training, your mood and most importantly your daily life. Whilst there are several causes of low back pain, some beyond the scope of this document, we can commonly say it is caused by one or several of the points below:

  • Your Lumbar spine doesn’t have the stability or strength to support the exercise you were doing.
  • You didn’t have enough strength endurance to withstand what you were repeatedly doing
  • You lack the flexibility in the surrounding areas, most importantly the hips and thoracic spine.
  • You lack the necessary core stability to resist excessive spinal movement
  • Your posture sucks
  • You were being stupid with the weights

While I can’t address you going HAM on the weights we can address the other issues and build your back from the ground up.

When we look at Gray Cooks joint-by-joint approach we can see different joints have different requirements to function correctly. The lumbar spine (lower back) is meant to be a stable joint whilst the hips and thoracic spine (upper back) are meant to be mobile joints. Based on this approach, the first thing I would advocate is to stop stretching out the lower back! The surrounding musculature is supposed to have a degree of stiffness to stabilise during movement.

We must then look at your posture to help determine a potential intolerance to either low back extension or flexion (arched back or rounded back). Some people may just live in one of these and carry it over into their training, putting the lumbar spine under constant load. One way to help determine this is do you suffer with more pain whilst sitting or standing? If it’s sitting, chances are it’s a flexion intolerance and for standing an extension intolerance. What this means is if your flexion intolerant you should be aiming to restore a more neutral/flat low back so if you can’t achieve that in the bottom of a squat or deadlift then start pulling off blocks and using box squats until optimal function is restored as you are doing more harm in the long run. If it’s extension intolerance you should be looking at owning your rib cage position and not over-arching during your squats and deadlifts. The pvc pipe is your friend and you should aim to have 3 points of contact with the pipe and only a small degree of space between the pipe and your lumbar spine.

Now that you have stopped stretching your low back and are more conscious of your overall posture in training, we can start to address your pain through breathing and alignment. We want the rib cage stacked on top of the pelvis to give us a stable structure from which to move from. If the pelvis is out of whack, this can put the whole system out of alignment and thus cause compensations. I’ve already talked about breathing here but going further, if you live in extension you should carry out your breathing drills with a bit more of a flexion bias such as:

If we are in more of a flexed posture we want to flatten that back out a bit and we can start on the ground

You can simply add these in to the start of your warm-ups for 10 good belly breaths aiming for 360-degree expansion of the mid section and followed by a full exhale whilst driving the ribs down to the pelvis.

Next we can look at mobilising the hips and thoracic spine, which are supposed to have a degree of movement. This means you need adequate flexibility in each to get into the correct positions without compensation at areas such as the lower back. We also need adequate flexibility in these two areas to build the stability we want in our low back and core. If you scored a 1 on your Deep Squat, Inline Lunge, Hurdle Step in your FMS, chances are you need to address this first. Try some of the exercises below, always re-testing to note improvement and ensuring you are on the right track.

Now we’ve worked on breathing and flexibility of the surrounding areas, we can focus on stability of the core and the low back. Remember we need stiffness in these areas to correctly utilise them in stabilising the spine during movement.

To start with you should own the basics:

Once you can manage these without low back pain/tension we can progress onto stability exercises with movement. We want to start on the ground first to give us the most support.

While they may seem simple, you should look to control these as slowly as possible whilst maintaining the posture we have already mentioned. You can also use the banded dead bug if you don’t have access to KBs.

We can then move on to the quadruped stance to challenge stability even further with the following:

Once these feel good progress onto

Again we are looking to own these with control and no tension/pain in the lower back. Once this is achieved we can progress on to the kneeling stance whether it be half kneeling or tall kneeling. With an even smaller base of support we add new stability challenges and lower body flexibility.

Hopefully at this point you should feel comfortable and see a reduction in pain/discomfort. You can then utilise some or all of these exercises as part of your warm-ups in preparation for the big lifts and to re-enforce. Just to re-iterate though, these exercises are useless if correct posture/spinal position is ignored. These exercises are about skill and control not speed and load lifted. Own each exercise before moving on.

The final piece of the puzzle is to build some posterior chain (glutes, erectos and hamstrings) strength and re-enforce core strength with more advanced exercises.

Take things slow and build quality movement before load. Get used to dialling in posture with breathing and rib control when lifting big and keep ion top of flexibility/accessory work.

This is by no means an all encompassing solution to alleviating back pain and I would always recommend consulting with a physio/chiropractor first to ensure you are safe to carry out training of this nature.

I’ve tried to learn as much as possible over the last 10 years with regards to optimal training and longevity. Trends have been and gone, the way we look at athletes has vastly changed as well as our outlook on rest and recovery.

However it’s easy to jump down the rabbit hole and get overwhelmed by all the content out there telling you what you should and shouldn’t be doing. The type of training you do is irrelevant as long it meets your goals and requirements and you enjoy it. Obviously if you’re training for a specific sport or performance marker then of course, the type of training has to be a bit more focused but again there are many tools that will work in each situation, there is no right or wrong way to train.

That being said I thought I would go through some of my most important tips to help maximise your potential in whatever training regimen you subscribe to and improve health and performance.

1) Get Assessed: If you’re truly interested in health and performance then your first step is to get assessed. Any good coach should be offering some form of assessment to see your current level with regards to movement quality, mobility and fitness ability. If you’re not being assessed, then the rest is just guesswork.

2) Earn Your Positions: An assessment isn’t worth the paper it’s written on if you don’t follow through on improving where required. Struggle to get overhead without excessive rib flare? Can’t keep a neutral position during a deadlift or squat? Your coach should be directing you on how to improve these or refer you to someone who can. You should also accept that if you have less than optimal positioning then certain movements may not be suitable for you AT THAT TIME. You want to stay injury free right? Take the advice, work on the problem areas and earn your right to incorporate those movements into your training.

3) Don’t Skip The Warm-up: You don’t need to spend 30 mins foam rolling and another 30 mins stretching, but your warm-up should be focused and relevant. It’s your chance to prime the body for the session and un-do some of the nasty postures and positions from your working day. Check out my article on warm-ups here.

4) Breathe Correctly: A lot of us live in an extended posture, which can lead to poor overhead position, lack of contribution from the posterior chain during hinging patterns and lack of core strength. Learning how to use correct breathing patterns including full exhales can help you get back to a more neutral position over time. It ain’t sexy or fun, but it works. Check out my article on breathing here.

5) Build Solid Foundations: I’ve seen time and time again, people skipping the boring foundational work to get to the fun, exciting throw heavy shit around stuff. It catches up with you. In my opinion, every athlete should spend time building

– Solid aerobic base: The better your aerobic capacity, the more efficient the heart and lungs will become. This leads to less contribution from the anaerobic systems as well as improved endurance and recovery. Read more here.

– Basic bodyweight strength: Everyone should be able to do strict press-ups, pull-ups and dips. In my perfect world, I would also have you doing a 1-arm pull-up and 1 arm press-up but the basics will suffice. It sets the stage for more advanced movements such as muscle-ups and handstand press-ups. It teaches you body awareness and control as well as building great amounts of core strength, which most people lack. I understand if someone is carrying some excess bodyweight this may not be possible……. yet, but once bodyweight has been reduced, build the foundations.

6) Don’t Ignore Assistance/Accessory Work: Anyone who says isolation exercises are useless is telling you lies. Have a sticking point in a lift? Struggling with stability or co-ordination on a movement? Assistance work can develop those weaker muscles and could help improve performance on your weak lifts. Now that doesn’t mean you stop doing the lift itself as you still need to build that pattern to efficiently recruit all the right muscles, but strengthening a weak area alongside can give you some great gains. I’ve seen a woman get strict pull-ups just by adding bicep curls into her training. Every exercise has a value when used in the right context.

7) Grease The Groove: Stolen from Pavel Tsatsouline, he talks about regular practice to improve efficiency and quality. Use an empty bar/pvc pipe/light DBs or KBs and slow the movement down. Feel the muscles firing in the right areas and make the movement become as natural as possible. Apply this to your heavier efforts to improve neural efficiency and therefore performance. Do it regularly, even some press-ups at home or work can go a long way to achieving this mastery.

8) Use Weighted Carries Frequently: If you have read anything by Dan John then you know how much he puts stock into weighted carries and drags. Grip strength is hugely overlooked when it comes to progressing training. Add to that the postural and core benefits when done correctly and you have a highly valuable exercise. Use DBs, KBs, Farmers Handles; whatever you can get your hands on. I also like bottoms-ups KB carries for shoulder health as well as grip training.

9) Build A Strong Posterior Chain: Glutes and hamstrings are typically inhibited and weak in most athletes. Movements such as bridges, hip thrusts, hyperextensions, hamstring curls and single leg work can really bring these muscles back in line and help improve health and performance. Bret Contreras has done some great studies on the effects of hip thrusts on glute activation/hypertrophy.

10) Don’t Cherry Pick Your Sessions: Ignoring your weaknesses will always come back to get you. Whether it be having to scale a workout or creating imbalances such as pressing over pulling or squatting over deadlifting. Yes training should be enjoyable but if you want to be able to become a well-rounded athlete, you need to develop the less enjoyable skills too!

11) Don’t Train Through Pain: Just don’t. If something hurts, you’re either doing it wrong or there is pathology somewhere. Assessments and good coaching should help you sort it. However that doesn’t mean you have to stop training and wish your life away at home. Work around the issue whilst fixing the cause and come back even better.

12) On the flipside: Don’t get scared of every ache and pain you experience. Again, consult a coach if unsure. Training is tough work, you are literally breaking your body down so it adapts and rebuilds stronger and more robust. It’s not always going to feel comfortable and if you want performance, you need to accept this. Listen to your body and ask questions if required.

13) Enter a Competition: It doesn’t matter whether it’s a sport, fitness comp or endurance event. The buzz, the butterflies and the adrenaline of a competition environment can really teach you some lessons about your body and mental toughness. This stuff is invaluable and can really help you take the next step on the performance ladder. Even if you only do it once, compete.

IMG_0272

This list is by no means exhaustive but I’ve covered some in gym tips with regards to training. Lets look at some tips for outside the gym.

14) Water: Again, overlooked when it comes to implications for training especially in the age of addiction to coffee and all that jazz. Aim to drink 2-3 litres per day. Simples.

15) Sleep: Hormonal balance is a delicate thing and one of the biggest disruptors to that balance is lack of quality sleep. Not to mention its effects on recovery after training. Aim to get 7-9 hours of sleep per night in a dark, cool room. Stop using screens at least 30 mins before bed to start to unwind or at least use an app like f.lux to alter the background colours of the screen.

16) Recovery Plan: Adaptation and therefore improved performance takes place out of the gym. Training is the stimulus; rest is where the magic happens. You should be incorporating rest/active recovery days each week. From there, every 6-8 weeks you should use a de-load/recovery week where you reduce volume or have it as rest/active recovery. Your body will thank you and the gains will continue.

Also think about getting a massage once a month or during your de-load phase. Salt baths, contrast showers, meditation and yoga all have their place on your recovery protocols. Utilising HRV can be another way to auto-regulate your training and keep on top of recovery/training intensity. Check out my articles on HRV here and here.

17) Nutrition: I’m by no means a nutritional expert, but the basics seem to work well with most. Manage your calories in and out, have some good pre-workout nutrition in place and you’re good to go. No restrictions, no ‘diets’, just wholesome food the majority of the time and the rest in moderation. Drop me an email for our free nutritional guide.

18) Supplements: Various supplements are useful for different people and are not always required. However, fish oil, zinc, magnesium ands vitamin D seem to work well. Examine.com are doing some great studies on the effectiveness of the majority of supplements out there.

19) Get Involved!: Get involved with the community at your gym whether it be socials, competitions, events or taking part! It adds so much more value to your training and helps the gym feel less of a chore.

20) Motivate Others: Encourage fellow athletes, congratulate them, and give them a high five or a fist bump. It sounds cheesy but again it builds a more positive atmosphere and makes it that little bit easier to get there when you have close friends training with you.

21) Take Responsibility: You might have a coach or trainer who sees you an hour once a day. Do you really think that’s enough time to get everything done that you may need? Yes they will make the programme as effective as possible in the time they spend with you, but chances are you may need more. More mobility training, extra skills work developing things like your bodyweight exercises, more aerobic work using zone 2 heart rate zones.

I’m sure you don’t want to pay someone to watch you foam roll or spend 30 mins on a treadmill do you? Take responsibility and put in the extra work to help take you to the next level. Not sure what you need to do? ASK! The coach/trainer is a resource to tap into. I love it when athletes ask me for help as it shows a dedication to their training beyond showing up for an hour and going home to forget about it all. However we can’t help you if you don’t ask us.

22) Consistency: All of the above don’t mean a thing if you don’t show up. Consistency is king when it comes to results. You could have the world’s best programme, nutrition and recovery plan – but this means nothing if you’re not consistent. You should be aiming to train at least 3x per week if you’re serious about progress/performance and at least 2x per week for more general health. Just get through the door and the rest will take care of itself.

Training isn’t about suffering through the grind and hating your life every session. Training should be a lifestyle choice and something you want to do rather than something you feel you have to. With so many ways to get fit and strong available the first step is finding something you are excited about doing then start to implement some of the strategies outlined above.

Here at Warrior we offer comprehensive assessments and fitness testing for members and non-members alike. We can also help you direct your training in the right direction to unlock your true potential. Interested? Email info@warriorstrength.co.uk to find out more.

Movement of the Week

Again, looking at shoulder stability and overall shoulder girdle health we have the Half Get-up with Screwdriver.

We all know that the Turkish Get-up is a great exercise for full body stability, proprioception and strength. While we aren’t going through the full movement during this exercise, we can still elicit some of those benefits. From there we add in the screwdriver, taking the shoulder through internal and external rotation and enabling the athlete to feel a good shoulder position. 

To begin with, start the movement unloaded with a clenched fist. Really try to feel the ball of the shoulder (humeral head) sitting right into the socket (glenoid) and avoid any humeral glide. The easy way to know if you’re doing it incorrect is that you’ll feel all the tension in the front of your shoulder or bicep meaning you’re out of position. Sit the shoulder back and down to a point where it feels stable and the tension is felt around the back of the shoulder/scapula (shoulder blade) area.

Finally once you have become proficient in keeping the correct position unloaded, start to utilise some weight through bottoms-up kettlebells (video). Bottoms-up means you won’t go crazy with the weight as it will punish you for being over-eager/stupid.

As always feel free to drop me an email, or send me a video of you doing the movement to check over. info@warriorstrength.co.uk

Front rack mobility, the bane of some peoples training regimen. You want to go heavy on the front squat or jerk, but you just can’t seem to get your arms into the right position or you can at the expense of some serious wrist pain.

While there are multiple factors that could contribute, the first step would be to address mobility/flexibility. Before we do that lets look at the front rack position itself for the front squat and jerk.

The front squat or the receiving position of the clean requires the bar to sit back on the finger tips and getting the triceps parallel to the floor. This allows us to create a shelf or rack to rest the bar on the shoulders and maintain as vertical torso as possible. Pictured above.

 

 

The jerk however is slightly different. Once we’ve stood the bar up from the clean we are looking at taking a firmer grasp on the bar and dropping the elbows down slightly. We want to achieve this while still supporting the bar on the shoulders.
IMG_1832

Give them a try with some light resistance, can you get into these positions comfortably? If you can’t, your performance and safety could be compromised, so let’s look at some fixes. Remember with any mobility, flexibility or stability exercise, you should see immediate change. Test and re-test, if no change is seen, move onto a different exercise/area.

Throacic Spine

First up we want adequate thoracic extension. This is going to allow adequate scapula movement. If we have sufficient movement of the shoulder blades it will reduce the amount of external rotation required at the shoulder. Looking at mobility first we can use the trusty foam roller.

Next we can use some dynamic stretching exercises

Next we can reinforce the new range of motion with stability to ensure we keep our new flexible upper back. Simply add some weight to the bar and carry out a series of 10 second holds with the bar in the front rack position.

Shoulders

Next up we want to address our shoulders ability to internally and externally rotate which will help the elbows stay up or allow us to spread the shoulders to keep contact with the bar. We can use a resistance band or pvc pipe for this.

Lats/Pecs

Once we’ve opened up the thoracic and shoulders we may also need to look at the lats and pecs to allow us to get into the front rack position, especially with the jerk. If you spend a lot of time sitting at a desk then chances are these areas could do with some work.

Triceps

Often overlooked the triceps could also be limiting our shoulders ability to externally rotate and thus the ability to keep the elbows up in the front squat.

Finally we want to look at the wrists ability to extend and support our position.

 

While there are a lot of exercises here and a lot to work through, some simple assessments may be able to point you to the right area. To add to this, if you sit for 8 hours a day at work, then 10 mins a day on these exercises is going to struggle to make a dent in your deficits. Get up, take breaks, mobilise often and consider posture and wrist position at your desk.

Similarly, it may be that you lack the correct core stability to keep the torso upright leading to a drop in the front rack. Is your back squat considerably higher than your front squat? Have adequate mobility? Perhaps some core strengthening work could be the answer.

 

Finally, carry out some front squats and then re-test with a heel lift under each foot. Dramatic improvement? Look at some calf and ankle mobility.

To re-iterate, test and re-test, if it improves you’re on the right track. If you suffer from pain during front squats or overhead pressing then change to goblet squats or DB squats/presses until the problem is resolved, there is always a way around. Never train through pain!

If you want to address these issues or other movement problems, remember we offer movement assessments and strategies to improve movement quality even if you’re not a member. Drop an email to info@warriorstrength.co.uk

I’m sure most of you have seen by now someone in a gym with a big piece of foam. You then watch as they begin to roll around on it with some questionable facial expressions, not sure whether they are in immense pain or deriving some kind of weird pleasure from it. To be honest, it could easily be both.

Foam rolling or self-myofascial release (SMR) has become a main staple of many peoples training which in my opinion is great. However having some basic understanding of what you are doing may help you grasp the importance of such maintenance or ‘prehab’ work.

Your body is made up of a system known as the kinetic chain – this system incorporates the soft tissue system (muscles, tendons, ligaments and fascia), neural system (nerves and CNS), and the articular system (joints). As the name implies the kinetic chain is a system which is responsible for producing movement and force, requiring all the elements of the system to work together to function correctly. If one element isn’t functioning efficiently, then other components must compensate, leading to tissue overload, fatigue, faulty movement patterns and potential injury.

Going into more depth, if we look at the cumulative injury cycle, along this cycle we can see how adhesions to the soft tissue can lead to altered neuromuscular control which in turn leads to poor movement and potential muscle imbalances.

cumulative_

What this means is that if we have a muscle that is tight due to adhesions, muscle length or neural hyperactivity it will affect the range of motion available at a particular joint. If the joint motion is altered then the neural feedback to the central nervous system (CNS) will be compromised resulting in poor movement patterns. These poor movement patterns will result in your body compensating through other joints or muscles leading to imbalances and potential injury. For example if you squat and have tight hamstrings, it could restrict the ROM and thus alter the joint motion of the knee and send the wrong signals to the CNS. Do this repetitively and it could result in the above issues.

This is where SMR comes in. Its primary focus is to alleviate such adhesions that can alter soft tissue structure also known as trigger points. It achieves this through a principle known as autogenic inhibition. The golgi tendon organ (GTO) is a mechanoreceptor which is sensitive to change in tension within a muscle/tendon group. Its main responsibility is to avoid high levels of tension within muscles through inhibiting the muscle spindles activity and causing the relevant muscles to relax (autogenic inhibition). With foam rolling the pressure you apply to the roller can simulate this high level of muscle tension causing the GTO to relax the muscles, allowing you to remove adhesions and improve ROM. So in a nutshell SMR can:

– Improve mobility and ROM
– Can help correct muscle imbalances
– Relieve muscle soreness and joint stress
– Reduce scar tissue and adhesions
– Decrease tone of over active muscles
– Improve quality of movement

So now we know how SMR works and how it can benefit us, let’s look at a few other tips to consider when carrying out SMR and a few basic techniques.

– Foam rolling can be used anytime, but as it has been shown to improve short term flexibility for over 10 mins it’s worthwhile using it in your warm-ups. This means you can build on your new found flexibility with strength and stability work.
– Try and avoid rolling directly onto injured areas. Think about the muscles up and down from the injured area and focus on those first.
– While we are trying to roll out adhesions and activate autogenic inhibition which can feel uncomfortable, we don’t want to be in excruciating pain. Rolling though high levels of pain can have the opposite effect and cause your muscles to tighten up even more.
– Roll slowly and smoothly for best results. Fascia is a thick, fibrous web of tissue and as such needs slow and deliberate pressure to release.
– If you find any really tender spots or trigger points then hold the roller in place on that spot and relax for 20-30 seconds. Ensure you take full deep breaths and avoid high levels of pain.
– Finally, ensure you adopt good posture when rolling. For example when rolling the quadriceps, try and ensure you maintain a neutral spine rather than allowing the hips to ‘sag’ towards the floor.

SMR can be a great tool for mobility, recovery and injury prevention. However to truly get the benefits, it needs to form a regular part of your training and done correctly. Once in a while just won’t cut it. See below for a video on some of the basic techniques.

Breathing, one of the simplest, most natural things we can do. Anyone can breathe and breathe correctly, right? When we think of breathing we think of simply breathing in and out with no consideration for what muscles are being utilised or how it affects our posture, training and stress levels. So let’s take a broader look at breathing and its practical applications.

 

 

–          Breathing can help increase intra-abdominal pressure and thus provide stability of the spine when lifting heavy things.

–          Correct breathing patterns can facilitate faster recovery through correct utilisation of the autonomic nervous system. This can apply to recovery between sets and recovery between workouts.

–          By utilising correct breathing patterns we can aid postural correction which in turn could reduce asymmetries and thus reduce injury risk.

–          Finally breathing can help improve performance!

Now when we refer to breathing techniques within exercise, we are talking about using the core to stabilise the spine. However to truly get the core stability we need, we have to utilise the diaphragm. If we have poor diaphragm function (most do) then we cannot fully contract these muscles and therefore unable to fully utilise lumbar extensor muscles for spinal stability which is where we need it most.  Put simply, if you can’t utilise your diaphragm correctly, you have a higher chance of developing lower back pain.

So what is the diaphragm and how does it work? It’s a dome shaped muscle at the bottom of the rib cage and as we breathe in, the diaphragm contracts and pushes down into the abdominal cavity. This decreases the pressure in the thoracic cavity and the lungs fill with air. When we breathe out the diaphragm relaxes allowing air out. SO what does this look like? When you breathe in the lower part of your abdomen (belly) should rise or expand as the diaphragm pushes down into the abdominal cavity, then the ribs should push down as we exhale to ensure we clear all the air out. What does it actually look like for most? Place one hand on your chest and one hand on your belly and relax and breathe normally. Which part of your body rises and falls? For most it will be the chest. This means that instead of using the diaphragm fully we are using accessory muscles such as the neck, lats an even hip flexors to help us breathe. As mentioned this could lead to anterior pelvic tilt, increased lumbar lordosis, back pain, neck pain and shoulder issues.

So how can we learn/improve diaphragmatic breathing? We can utilise the following progressions. In all cases the aim is to breathe not just into the belly, but incorporating a 360 expansion of the core. This means that when you breathe in correctly, your belly should expand as well as the lateral (side) and lower back muscles too. This is why we start on the floor so you can feel if your lower back is expanding as it will push into the floor. This is where most people struggle so own these progressions before moving on.

Crocodile breathing poses more of a challenge as people will try to exclusively push their belly into the floor. Remember we want 360 degree expansion of the core so lower back and lateral muscles should expand as well making you look like a crocodile. Get someone to check if unsure. If you can master these drills, you are on the right track!!

So in terms of core stability ensuring the diaphragm moves down into the abdominal cavity correctly will mean that the pelvic floor and then the abdominal wall will contract and thus forcing the lumbar extensor muscles to contract. This means that when you breathe correctly you will feel a 360 degree expansion of tension and true spinal stability. This brings us nicely into its practical applications through abdominal bracing.

Once we’ve nailed down our breathing techniques we want to be able to apply that to core stability and abdominal bracing to move heavy things. From here we’ve done the hardest part of getting our entire core to expand when we breathe and now we just need to maintain that position/tension through bracing. Think of bracing as trying to deflect a punch to the stomach, you have that 360 expansion, but now its solid to touch, that’s bracing. However we should still be able to breathe while holding that position so if the diaphragm is working correctly you should have a solid core all the way to the bottom of the abdomen and still be able to breathe. That is true core stability!

A great way to practice this is through the use of a lifting belt or resistance band tied around the waist. The belt or band provides feedback in terms of that 360 degree brace, then you can practice breathing while still maintaining that tension against the belt or band. Remember though you really need to focus on that full expansion and not just pushing your belly into the floor as again you’ll compensate somewhere else along the body.

What next? Well once you have mastered the breathing and the bracing, you want to add more challenge by utilising these techniques with movement. Having good breathing techniques and bracing ability is useless if you can’t maintain it while moving as that is the main reason you are using it! So we can begin to practice through unloaded exercises such as the Dead Bug, Bird Dog or even as simple as single leg lowering!

If you can apply the principles above whilst carrying out these movements then it’s time to apply those techniques under load. Get squatting, deadlifting and pressing and see how these new techniques change the way the movement feels. Now please don’t mistake this article as some sort of Holy Grail, yes these techniques can improve efficiency and therefore performance and they can definitely help improve posture and minimise injury risk. However once you learn to breathe and brace correctly you won’t suddenly put 50lbs on your lifts, this application is for the long term health, performance and recovery of your body. You have still got to put in the work, perform correct technique and follow a structured programme. This is just another tool to help on the journey to greatness and with so many people reporting the benefits of improving breathing technique, it’s one that can’t be ignored.

JOIN THE MAILING LIST

Copyright © 2017 Warrior Training. All rights reserved.